The classic ARB 40 Series bumper is back for a limited time!

cruiseroutfit

Supporting Vendor
Moderator
 
 
Joined
Jan 9, 2003
Messages
9,467
Location
Utah
Tried:
Amazon product
It would need to be re-drilled as the holes do not align-up and it does not come with bolts that go through the bumper ears
Hmmm, the re-drill of the fairlead back plate isn't uncommon, we have to do that on many winch installs. Generally you remove the side roller pins, move the hole 1" and reassemble. The lack of the long bolts is odd. I don't have a set of the instructions handy with me, do they discuss the winch fairlead mounting? They should have the long bolts in the fit kit. Can you snap a picture of all the hardware you received?
 

GoPats

SILVER Star
Joined
Oct 21, 2017
Messages
114
Location
Eagle, ID
Hmmm, the re-drill of the fairlead back plate isn't uncommon, we have to do that on many winch installs. Generally you remove the side roller pins, move the hole 1" and reassemble. The lack of the long bolts is odd. I don't have a set of the instructions handy with me, do they discuss the winch fairlead mounting? They should have the long bolts in the fit kit. Can you snap a picture of all the hardware you received?
This what you were looking for?

ARB_Bumper_Hardware.jpg
 

Attachments

cruiseroutfit

Supporting Vendor
Moderator
 
 
Joined
Jan 9, 2003
Messages
9,467
Location
Utah
The two bolts on the far right are exactly what you're after no?
 

cruiseroutfit

Supporting Vendor
Moderator
 
 
Joined
Jan 9, 2003
Messages
9,467
Location
Utah
Back at my desk for a minute with PDF instructions:

The two big bolts on the right of your picture should be the ones you're after

winch1.JPG


winch2.JPG
 

GoPats

SILVER Star
Joined
Oct 21, 2017
Messages
114
Location
Eagle, ID
Ok ... took me a bit doing it solo, but I think I have it mounted correctly ... here are a few pics inside (since it is night now) ... will get a couple outside tomorrow.
1945639
1945643






FJ40_ARB_Bull_Bar_Bumper_4.jpg
 
Last edited:

cruiseroutfit

Supporting Vendor
Moderator
 
 
Joined
Jan 9, 2003
Messages
9,467
Location
Utah
:cool:

I can't wait to see more installed pics. We had 4 picked up at our shop yesterday. Let's see more pics!
 

cruiseroutfit

Supporting Vendor
Moderator
 
 
Joined
Jan 9, 2003
Messages
9,467
Location
Utah
Love it can’t wait for mine. Did you just start getting them shipped
They started shipping to our customers approx. 1 month ago. They are shipping in the order the invoice was setup so if you ordered late in the promo window, you're going to get the bumper later. You can read back through the last 15-20 posts on this thread for updates as we've been shipping.
 
Joined
May 29, 2011
Messages
2,545
Location
Houston TX
Kurt are they all spoken for ? just picked up an HJ45....... will be calling you this week on a batch of things like disc brake conversion etc...

So stoked to finally have a clean 45.... it's a 79 w/ power steering and AC that just needs a bit of love and finishing touches to be perfect.

IMG_2445.JPG
 

cruiseroutfit

Supporting Vendor
Moderator
 
 
Joined
Jan 9, 2003
Messages
9,467
Location
Utah
We may have some avail. We have an active waiting list that we will work through after we fulfill all of the orders that were placed during the promo.
 
Top Bottom