Lou's [it only needs a clutch] 1976 FJ40

under_psi

SILVER Star
 
Joined
Oct 15, 2006
Messages
989
Location
Madison
Guaranteed!!!!!

LOL
while you're inspecting the 2B baby bucket's rock selection, will you please look at that 4wd shifter and see WTH the P/O did? its got the wrong handle.....or something.....more like a hack job.

thanks....
 

under_psi

SILVER Star
 
Joined
Oct 15, 2006
Messages
989
Location
Madison
cleaned up the gob in preparation for the coming parts pile, and subsequently made another pile....

I have some items for sale, full heater, tubing, blower, all 3 knobs (in working order - all of it). I did a resto on the heater box when I originally red this 40, and its all still in good shape. the heater/vent lever is missing one of the plastic bushings to make it function accurately, but it was switching for me the way it is set.....the hoses are god, core is good and clean, etc...

fj40 stock (driver side) tire carrier and latch.

chevy 350 performer intake and eldebrock 1406 4BBL carb (less than 1 year old)

id like to sell the whole heater blower set up as a set. $500

Intake $100
Carb/Air Cleaner $150

rear mounted fuel tank with straps, bulkhead, and calibrated centroid sending unit. ~21 gallons. Poly. can be used as a stand alone or auxiliary tank. $200
pXgpywHiRtmh5jkK6RubWQ.jpg
LsnwO3TZToiUAatS7P7UBg.jpg
Fnvkh8HySOKUJu8CYuPvIA.jpg
ET7PTSkzQbOFMOwy8QuIzQ.jpg
 

BMThiker

I aim to misbehave
Moderator
SILVER Star
 
Joined
Sep 19, 2006
Messages
9,058
Location
Atlanta
I imagine @jynx 's wife might be interested in some of those piles. When is she going to join MUD?
 

dnp

Supporting Vendor
SILVER Star
 
 
Joined
May 2, 2004
Messages
5,055
Location
Jackson, MS
I haven't seen this thread in a while. What's the new overall engine prescription? Fuel Injection?
 

under_psi

SILVER Star
 
Joined
Oct 15, 2006
Messages
989
Location
Madison
full harness shakedown v2.1

cleaned and inspected. fixed the wires that were cut and bypassed and reconnected them. so, for now, no more random runs. I was able to tape-in a couple that were loose, like the 12v+ to distributor and the oil pressure sensor. I was able to loom them in on the main harness (using the OE wires) and route them out where the wiper wash motor connector comes through the firewall. that way there is only a short run for them..

I am afraid of all the wires I will have to add in for the air, fans, efi, and new cluster.

nytZNrXnSrOImiA2o%wc%A.jpg


gXdYS5u3R5qsFKD%Opkw8g.jpg


and a pic of the new Dakota Digital cluster

58200315316__7E31984C-0F57-4A1F-A071-34419E3619BF.JPG
 
Top Bottom