Lost Industries Introduction

Lost Industries

Supporting Vendor
GOLD Star
Joined
Nov 26, 2018
Messages
65
Location
AZ
Hi guy and gals,

I have a small machine shop in AZ. My main business is heavy machining and repairs. I also do cnc work and manual machining. I have also made several custom adapter over the yrs and built lots of custom axle assemblies.
I recently started designing a few things for my 96 FZJ80. I have a front bumper in 2 versions, a roof rack(modular) similar to bowfin, and sliders.

That is all,
Chris

IMG_20181114_182129.jpg


20181011_181013.jpg


20181107_171512.jpg
 

Lost Industries

Supporting Vendor
GOLD Star
Joined
Nov 26, 2018
Messages
65
Location
AZ
That front bumper looks great. Do you have plans to make a rear one?
Yes I do have plans to make a rear bumper. I have the base drawn up but haven't cut anything yet. I'm hoping to cut some pieces in the next few weeks. I'll probably design it with option for single swing out or dual swing out.

I'm fitting the Gen 2 front bumper together this afternoon.
 

Lost Industries

Supporting Vendor
GOLD Star
Joined
Nov 26, 2018
Messages
65
Location
AZ
What are you charging? I'm looking at my longer term budget haha!
The initial offering of the front bumper on Instagram was 975 raw plus shipping for the 1st 5 bumpers. I'll off the same thing here. The Gen 2 that will be wrapped up most likely tomorrow will be an initial offering of 1100 since the wings are out of chromoly to increase strength and keep it light.
 

Lost Industries

Supporting Vendor
GOLD Star
Joined
Nov 26, 2018
Messages
65
Location
AZ
Think I found a front bumper I’d be willing to go with if I take it that far.. Welcome, great intro and even better fab skills! Those bumpers look top notch
Thanks. I try and build form and function while trying to keep it simple. I'll post up some pictures of the finished Gen 2 front bumper tomorrow.
The Gen 1 pictured on the LX450 in the 1st picture is only 82lbs.
 

Lost Industries

Supporting Vendor
GOLD Star
Joined
Nov 26, 2018
Messages
65
Location
AZ
Will a Warn 8274 fit? Bumpers look great by the way!
I've been trying to track an 8274 down to test fit one. I know my mile marker 12k, warn 8k, smittybilt x20 10k fit fine . The warn big frame 12k fits if you trimmed the lower grill area. I think I can push the mounting out and delete the fairlead mount to fit a warn 12k without touching the body.
 
Top Bottom