Anyone? - CLC Classifieds thread

Joined
Feb 12, 2010
Messages
1,161
Location
Stuck in Lodi (Again)
WANTED:

This isn't worthy of a stand-alone thread so I thought I would post it here. I'm looking for a transfer case to mate to a 4-speed transmission. If anyone local-ish has one in their stash, let me know.

Thanks,
Patrick
 

Bodean

Hot Damn
SILVER Star
 
Joined
Dec 20, 2004
Messages
11,463
Location
Brandon, MS
WANTED:

This isn't worthy of a stand-alone thread so I thought I would post it here. I'm looking for a transfer case to mate to a 4-speed transmission. If anyone local-ish has one in their stash, let me know.

Thanks,
Patrick
T-case for that 40?
 
Joined
Feb 12, 2010
Messages
1,161
Location
Stuck in Lodi (Again)
Damn we should have one of those in our stash since we all went Orion as some point in the transformation of our 40's. That a 74?

Yes, its 1974. I have a line on a 3 spd t-case, but don't really need the crawl ratio for a farm truck and would rather not deal with the conversion/parts required to mate it.

Also, the engine has a whopping compression of 65 psi (warmed up and wet) on #6 and is barely making power on #5 (110). While explosions of un-burned fuel out of the tail pipe are kinda cool, I think it's probably coming out. I think I have a replacement engine lined up, so I'd like to go ahead and find the replacement t case and bolt it on and then stab in the whole set up at one time.

Thanks for asking/looking into it.
 

wngrog

SILVER Star
 
 
 
Joined
Feb 10, 2002
Messages
30,545
Location
Canton, Mississippi
I have had a few recently but none now. A 4 speed case should be cheaper than all that is needed to convert the 3 speed case to your tranny ($300+ for those parts).
 

Bodean

Hot Damn
SILVER Star
 
Joined
Dec 20, 2004
Messages
11,463
Location
Brandon, MS
I have had a few recently but none now. A 4 speed case should be cheaper than all that is needed to convert the 3 speed case to your tranny ($300+ for those parts).
That was a 4 speed tranny with a 3 speed t-case if I remember my 74 right. Never did any mods except put a t-case saver on it so I'm not sure what it would take to put a later model t-case in that truck. Georg would be my next call if it were me.

What's wrong with the one that's in it?
 

Dustin Messina

djmcruisers
SILVER Star
Joined
Mar 17, 2017
Messages
624
Location
Mississippi
Decided to sell a few guns. First- Smith Wesson Model 19 (pre lock) Nickel .357 2.5” $500. Second- Larue AR Built to be an MK12 with full stock. (Have additional Larue adjustable stock as well) Full LWRC Lower parts kit ($400 just in parts kit) Larue 2 stage trigger. Absolutely hammers and extremely high quality AR. We don’t need to talk about how much I have in this.... $1500 base rifle no optics or sights. Third- Custom build Dixie Precision Rifle, Remington 700 action trued, 300WM Brux #5 barrel Fluted 26” with Seamless brake, Fluted bolt, custom load developed. (Action only needs trigger stock) $1000. If you know anybody looking let me know.

DEC535A1-6134-4BDB-9EDE-B74E775E2553.jpeg


6EECE816-B303-4770-A597-F2CE3381A816.jpeg


A9059A56-1480-4552-AC32-59ECEBE45BC4.jpeg


A2DD48C8-21B7-4E3C-ACE6-37CBE6E97252.jpeg
 
Top Bottom