15% off coupon and new prices on my website

bhicks

Supporting Vendor
Joined
May 1, 2012
Messages
3,847
Location
Socal, Forest Falls
Thanks for the orders guys. I just got back from a 3 day mini fishing/camping trip with my boys to a favorite fishing spot. I will get all these new orders processed and packaged today and mailed out tomorrow.
 
Joined
Apr 19, 2010
Messages
39
I ordered the 80 series cupholder console insert. It arrived quickly and well packaged. The fit and finish are great. Really pleased with the product.
 

bhicks

Supporting Vendor
Joined
May 1, 2012
Messages
3,847
Location
Socal, Forest Falls
Been working on the 40 series cup holders over the last few weeks. These are for the ones that came with a center console. I'm not 100% sure what years these consoles came on but they are the only consoles I have been able to track down. Here's a sneak peak of what I will be releasing in September. Here's the single I have so far.
 

bhicks

Supporting Vendor
Joined
May 1, 2012
Messages
3,847
Location
Socal, Forest Falls
Here is the double cup holder/organizer for the larger later years console (had the rear heat under it). I don't have pics of the cup holder installed because it was so brittle it literally fell apart on me. It's just pieces loosely held together with duct tape now. I will do my best to track down another console that isn't in pieces for better pics.

 

Hugh Heifer

Hangin' in Virginessee.
 
Joined
May 10, 2006
Messages
6,655
Location
Bristol, VA
How about an insert for a 100 series center cup holder (the butterfly brackets are always broken or missing) or maybe an organizer for inside the large center console? :cheers:
 

bhicks

Supporting Vendor
Joined
May 1, 2012
Messages
3,847
Location
Socal, Forest Falls
How about an insert for a 100 series center cup holder (the butterfly brackets are always broken or missing) or maybe an organizer for inside the large center console? :cheers:
I owned a 100 for a couple years and asked around to see if there was interest for this but got very few responses so I gave up on the project. I no longer own the 100 so it would be difficult to make the insert. If there was enough interest and I had acess to a local 100 then I could probably get this project going.
 

Hugh Heifer

Hangin' in Virginessee.
 
Joined
May 10, 2006
Messages
6,655
Location
Bristol, VA
I must have missed while overseas. I wasn't on as much without a project. Maybe eventually. Thanks for responding. :beer:
 
Joined
Sep 24, 2016
Messages
30
Location
Jefferson, Oregon
How well does spray paint adhere to this type of plastic? This is gonna save me a lot(time and money) and still look stock in my BJ60.

Oh and anybody know what used to be screwed to the sides of my center console (60 series)? Looks like it may have been something to hold the seat belt in place.
 

bhicks

Supporting Vendor
Joined
May 1, 2012
Messages
3,847
Location
Socal, Forest Falls
How well does spray paint adhere to this type of plastic? This is gonna save me a lot(time and money) and still look stock in my BJ60.

Oh and anybody know what used to be screwed to the sides of my center console (60 series)? Looks like it may have been something to hold the seat belt in place.
You have to use a spray paint that is specifically designed for plastic. Quite a few of the big Brands now on the market show on the bottle that it will stick to plastic. ABS plastic works well at bonding to paint. Some Plastics like nylon will not accept paint at all. I use ABS plastic for all of my 3D printed parts.
 
Joined
Mar 24, 2009
Messages
2,187
Location
Mesa, AZ
How about an insert for a 100 series center cup holder (the butterfly brackets are always broken or missing) or maybe an organizer for inside the large center console? :cheers:
I owned a 100 for a couple years and asked around to see if there was interest for this but got very few responses so I gave up on the project. I no longer own the 100 so it would be difficult to make the insert. If there was enough interest and I had acess to a local 100 then I could probably get this project going.
Ive been looking for something like this as well the "butterflies" in ours don't stay at all and cups just tip over.
 

bhicks

Supporting Vendor
Joined
May 1, 2012
Messages
3,847
Location
Socal, Forest Falls
Ive been looking for something like this as well the "butterflies" in ours don't stay at all and cups just tip over.
Maybe I should look into this project again. It's possible the demand is there now. I need access to a local 100 for a few days.
 
Last edited:

bhicks

Supporting Vendor
Joined
May 1, 2012
Messages
3,847
Location
Socal, Forest Falls
I can't believe in October that I'm already getting questions about Christmas/Holiday promos but I got 3 just in the last 2 days. I will not be running any promo beyond my current mud discount during the holidays. The free shipping and 15% mud discount will run through 1/1/18. The coupon code is "TEQ15" and is good for 2 1/2 more months. I don't think I will be able to continue the promo after that due to the cost increase of filament, shipping, paint, hardware, aluminum, etc. It's seems like EVERYTHING is going up rapidly right now and my profits and getting super small.
 

bhicks

Supporting Vendor
Joined
May 1, 2012
Messages
3,847
Location
Socal, Forest Falls
So Halloween is officially behind us and the holiday rush is about to begin. I wanted to remind folks of two things before ordering. One is that my Mud discount of 15% off the entire order and free shipping is still good through the 1st of January. Coupon code "TEQ15" during checkout. Also, orders may take 4-5 days to process and not my usual 2-3 days due to the increase in orders. Please be patient with me during November and December. Shipping simply takes a little longer during this super busy time. I process orders as fast as I can. I wish I could hire people for the holidays but just can't stomach firing them as soon as the holidays are over.
 
Joined
Oct 24, 2017
Messages
288
Location
Portland Oregon
This is great!!! Not too expensive and serving its purpose.... To hold my coffee. Haha. Just ordered mine. Are you making other types of things for the 60s series?
 

bhicks

Supporting Vendor
Joined
May 1, 2012
Messages
3,847
Location
Socal, Forest Falls
This is great!!! Not too expensive and serving its purpose.... To hold my coffee. Haha. Just ordered mine. Are you making other types of things for the 60s series?
Eventually I plan to release a rear cup holder, a TEQ grille badge, and possibly a cellphone/gps dash mount. I just can't do any new product development during my current busy season. Once orders slow down in a couple months, I will start the design process up again on a bunch of new products.
 

bhicks

Supporting Vendor
Joined
May 1, 2012
Messages
3,847
Location
Socal, Forest Falls
Finally got the updates working properly on my website. Gave the home page a new look. Hopefully it's a lot easier to find specific products now.
www.bh3dprinting.com
Now I need to do the same thing to my etsy page. It needs some serious visual updates.
 
Top Bottom